How do you refinish a wooden canoe paddle?

What can I use to coat a canoe paddle?

You may use a fine marine tung oil product like Behr or boiled linseed oil. For more tips on oiling your Badger Paddle, please visit our maintenance page. To truly keep your paddle in it’s best condition, a varnished paddle should be checked for any “scars” from use at the end of every season.

How do you paint a wooden canoe paddle?

Here’s how to do it:

  1. Take sandpaper and carefully sand down the blade of your paddle until smooth.
  2. Using a ruler, pencil and painter’s tape, create your own pattern or design on the front side of your paddle blade.
  3. Using acrylic paint and a paintbrush, paint around taped sections in colours of your choice. …
  4. Leave to dry.

How do you waterproof a wooden paddle?

Touch Up: seal any exposed wood with varnish on a regular basis. Lightly sand area, apply a diluted (by 10%) coat of finish and let dry. Lightly sand area again and apply a full strength coat of varnish. Complete Refinish: strip all finish off the paddle using sand paper.

How long should a canoe paddle be?

Length. Most canoers require a paddle in the 52″ to 60″ range; sizes are typically offered in 2″ increments. Bent-shaft paddles are generally shorter due to their shorter, wider blades; common lengths are 48″ to 54″.

IT IS INTERESTING:  Question: Can you swim in the Kimberleys?

How do you treat canoe paddles?

Make sure your paddle is clean and dry. If not, clean your paddle well with fresh water and dry completely. Gently sand roughed spots (if needed) with a 220 grit sandpaper, then finishing with a 320 grit paper to help ensure a smooth finish. Use a lint-free cloth to run oil over the entire surface of the paddle.

How do you take care of a canoe paddle?

When the season is over, take a good look over your paddle, wipe it off, and assess the damage. If there are little divots and scratches, you can easily re-poly that part of the paddle. Using around 200-grit sandpaper, sand the finish just a bit.

How do you paint wooden oar?

Priming and Painting Blades:

  1. Step 1: Clean blades with Acetone to remove clear coat.
  2. Step 3: Lightly prime with an epoxy spray primer.
  3. Step 4: Let dry, then apply 2 to 3 more coats and let dry in between each coat.
  4. Step 5: Sand with 400 grit sandpaper, rinse and dry.

What paint do you use on paddles?

The first step in making your paddle is to paint it. You may be staining it, painting it, or decorating the paddle in some way, but this step should be done first. Painting is most common. The best paint to use for a paddle is acrylic paint.

What is spar varnish made of?

Spar varnish is a type of marine varnish that is generally composed of natural oils and resins. It was the only type available when boats were made from wood. Polyurethane is the newest type of coating for boats and it looks like spar varnish but it doesn’t make your boat shiny like spar does.

IT IS INTERESTING:  When should I pop up surfing?

How do you remove varnish from a paddle?

Just strip the handle and grip if it is laminated, leave the blade be. Use 110 then 220 sandpaper and then for a proper resealing take turpentine 80% and varnish 20% and re coat the shaft and let this dry; sand it back down lightly. The turpentine and varnish will have sealed all the pores in the wood.