Can you sell old scuba tanks?
Turn old diving tanks into cash
Even if your tank isn’t usable for diving, you may be able to remove and sell the valves, or sell the entire tank for scrap metal. When in doubt, bring it to a local dive shop, where the staff may know how to reuse it.
Can you recycle old scuba tanks?
Scuba cylinders just can’t be thrown away or put in your trash bin. If a scuba cylinder would be accidently crushed with compress air, this would result in an explosion, possibly hurting or killing someone.
How do I know if my scuba tank is good?
The tank should be inspected at least once a year by a trained technician. The visual inspection process includes checking for cuts, dents, stress lines, bulges, current hydrostatic test date, and signs of general abuse outside, and pits, corrosion, coating defects, neck cracks, and thread integrity inside.
How long can you keep a scuba tank?
Do not store tanks that are full of air for prolonged periods of time (no more than 3 months. A tank should be stored with just enough pressure (200 psi) to keep moisture out. Remember the higher the tank pressure, the greater the corrosion that may form inside.
Are old scuba tanks worth money?
Scrap metal value of scuba tanks:
At current rates, scrap aluminum is worth about $0.75 per lb. So the current minimum value of an aluminum scuba tank (without the tank valve) is around $23. A standard steel 80 cu/ft tank weighs about 35 lbs empty. At current rates, scrap steel is worth about $0.17 per lb.
What can you do with old scuba gear?
Consider donating your gear to an organization that uses divers, like your local aquarium. Jack Kuhn of Harbor Dive in Sausalito, CA, donates his store’s used wetsuits, masks and fins to the nearby Marine Mammal Center.
Are old scuba tanks good for anything?
Use the tank for an art project. From doorstops to lamp bases, used scuba tanks can be painted, cut up, and polished for a variety of uses. Scuba tanks even make great planters for the diving gardener.
How do you dispose of a scuba tank?
They should be rendered unusable for dive purposes and disposed of as scrap metal. You could drill the tanks, usually a 3/8″ or 1/2″ drill bit applied in a couple of places does the trick. Another method is to destroy the threads where the valve screws in. A simple cold chisel would do that job nicely.
How much does it cost to Hydro scuba tank?
Federal Law requires a new hydrostatic test every five years for most SCUBA tanks. AHS will provide this service for $55 per tank and it includes the test, a visual inspection, and an air fill. Hydro with a Nitrox fill is $62.
How do I know if my scuba tank is aluminum or steel?
Aluminum is softer than steel. Aluminum tanks must have thicker walls than steel tanks to hold air at a comparable pressure. Because aluminum is softer than steel, it scratches and dents more easily. Steel tanks may rust in the presence of moisture.
Can I fill my scuba tank with an air compressor?
Scuba tanks typically need to be filled at very high pressure (about 3,000 psi). Using a regular air compressor would only be able to provide a fraction of the air that scuba compressors can. Secondly, the scuba compressors have filters that are designed to purify the air that goes through them and fills the tank.
Should you store scuba tanks full or empty?
Never Store Your Scuba Cylinder Empty
Your scuba cylinder should always be stored with a minimum of 200 psi inside of it. If it is stored completely empty, the absence of pressure inside the cylinder can allow all sorts of things to enter into it. Most divers don’t think much in the way of their scuba cylinders.
How long does a scuba tank last at 47 meters?
At 47 meters even an experienced diver with a fantastic air consumption rate would quickly drain their scuba cylinder, probably in less than 20 minutes. An inexperienced diver swimming, talking and being harassed by sharks MIGHT make it five minutes at that depth.