Can you wakeboard behind an outboard motor?
Inboard boats, including direct drives and V-drives, are the only types of boats you can safely wakesurf behind. … To recap, you should ONLY wakesurf behind an inboard board, never behind an outboard or inboard/outboard (stern drive) due to the risk of making contact with the propeller and the proximity of the exhaust.
What kind of boat do you need for wakeboarding?
Specialized ski/wakeboard boats usually cost more than do production runabouts or sportboats. Only inboard boats should be used for wake surfing for the obvious reason shown here. RULE #1: Only wake surf behind an inboard-powered boat! Don’t even think about doing it behind a sterndrive or outboard-powered boat.
How big of a motor do you need to wakeboard?
While you can wakeboard with as little as 25 HP, a quality wake generally requires a 135+HP loaded boat. Boat owners often recommend 90 HP on a 16′ boat as the minimum for serious slalom skiing and wakeboarding on a fully loaded boat. 115 HP will generally be comfortable, while 75 HP may barely be enough.
Does wakeboarding require a special boat?
Wakeboarding has evolved into wakesurfing, the newest infant of water sports. The boats needed for wakesurfing are even more highly specialized, and you’re not likely to get the curl needed for surfing even with a wakeboat making the largest possible wakes.
Can you waterski behind any boat?
In general, it’s possible to ski behind almost any boat that can plane. … The more horsepower, the faster you can pull a good trick skier out of the water, especially a bigger skier. Even so, it’s worth noting many classic Chris Crafts ski inboard boats had no more than 60-80 HP and worked fine for slalom skiing.
Can I pull a tube with a 50 hp outboard?
Can you pull a tube with a 50 hp motor? The 50HP will definitely be enough to pull the kids on a tube. Tube speeds don’t have to be excessive, and since they float, it doesn’t take much power to get them gliding across the water.
Is 90 hp enough for tubing?
Horsepower and Speed
Tubing doesn’t require quite as much speed, and you can start to have fun at around 15 miles per hour. A pontoon boat with a 70 horsepower engine is plenty for tubing. … And 90 HP might be enough for a 20-foot boat to pull a skier, but you’re going to need more engine to ski behind a 26-foot boat.
Can you ski behind a 75 hp motor?
A 75 hp motor will pull skiers no problem. The main thing would to have a second prop at least 2 pitchs lower to help give you more power to pull them up.